Steps to Take When Your Appliance is Recalled

Protect your home by knowing what to do when an appliance poses a safety risk

Did you know that 50% of homes are likely to have at least one product that’s been part of a recall? Over the past five years alone, more than 15 million appliances have been recalled. That’s a staggering number! If you ever find yourself in this situation, knowing what to do next is essential—especially if the recall is related to a safety issue. Let’s walk through the steps you should take if an appliance in your home has been recalled.

Why Are Appliances Recalled?

courtesy of OpenClipart-Vectors.

Recalls usually happen for one of two reasons: either a design flaw prevents the appliance from working properly, or the defect makes the appliance downright dangerous to use. These issues could range from something as minor as a faulty part to something as serious as a fire risk. Once a recall is issued, the appliance in question can no longer be sold and should not be used until it’s been repaired, replaced, or refunded.

What’s the Impact of a Recall?

The impact depends on the nature of the recall. In some cases, it’s a minor fix. Other times, it’s a serious safety concern that requires you to stop using the appliance immediately. Either way, a recall can cause some disruption, but it’s always done with your safety in mind. Addressing it promptly could help prevent potential accidents in your home.

Who Handles Recalls?

There are six different agencies in the U.S. responsible for managing recalls, each overseeing different types of products:

1. Consumer Product Safety Commission (CPSC) – The main agency for home appliances and general consumer products.

2. Food and Drug Administration (FDA) – Oversees food, drugs, and medical devices.

3. National Highway Traffic Safety Administration (NHTSA) – Handles motor vehicle safety.

4. Environmental Protection Agency (EPA) – Regulates things like pesticides and hazardous chemicals.

5. Department of Agriculture (USDA) – Manages recalls for meat, poultry, and eggs.

6. Coast Guard – Deals with boats and watercraft safety.

Courtesy of Cyber Rabbit.

As you can see, although they all handle ‘recalls’ only one of them deals specifically with home appliances. We point this out so that if you hear of a recall that isn’t coming from them, you should know to do more research. 

I Heard About a Recall—What Should I Do?

Let’s use a recent example: imagine you’ve just heard about a recall for Frigidaire appliances. Here’s what you need to do:

1. Check the CPSC Website
   Head over to the Consumer Product Safety Commission’s website and look up the recall. You’ll need the model and serial number of your appliance to confirm whether it’s part of the recall. They will always tell you where you should look to find your model number. 

2. Contact the Manufacturer
   Once you’ve confirmed that your appliance is included, get in touch with the manufacturer. They’ll give you instructions on what to do next. Depending on the recall, they may offer you a repair, replacement, refund, or rebate.

3. Refund vs. Rebate: What’s the Difference?

• Refund: You get your money back.

• Rebate: You get a partial refund or credit toward another product from the same company.

4. Keep Detailed Records
   Be sure to document everything! This includes dates, names of people you speak to, reference numbers, and any communication you have with the manufacturer. Keeping track of these details will help you if any issues arise.

5. Discuss the Recall with Your Household
   It’s important to talk with everyone in the house about the recall. Here’s why:

• Awareness: Make sure everyone knows not to use the appliance.

• Assess the Risk: Decide whether the issue is minor or major based on your needs. A broken oven light might be one thing, but a fire hazard is another.

• Make a Plan: Depending on the situation, you may need to change your routine. This could be as simple as planning alternative meals while waiting on a repair, or keeping a close eye on the appliance if you continue to use it.

Courtesy of StockSnap

Prioritize Safety When Dealing with a Recalled Appliance

Once you’ve confirmed that your appliance is part of a recall, the most important step is to stop using it immediately. Even if the issue seems minor—like a malfunctioning light or a door that doesn’t seal properly—there could be hidden risks that aren’t immediately obvious. Unplug the appliance or turn off its circuit breaker to prevent any accidental use while you wait for the repair or replacement. Safety should always come first, especially when it involves risks like overheating, electrical malfunctions, or potential fire hazards.

While waiting for a solution, consider the impact of the recalled appliance on your household. For example, if the issue is with your refrigerator or oven, you’ll need to find safe alternatives for storing food or preparing meals until the appliance is fixed. In cases where the recall affects something more critical, like a washing machine with a potential water leak, it’s essential to prevent further damage by keeping the appliance unplugged and notifying all household members about the issue.

Finally, take extra precautions if the appliance is located in a high-traffic area or is used frequently. If the recall notice mentions fire risks or electrical hazards, make sure the area around the appliance is clear of any flammable materials. Stay vigilant and check for any additional signs of malfunction, such as strange smells, sparks, or unusual noises. Acting swiftly and staying informed are the best ways to protect your home and loved ones while you wait for the manufacturer to address the issue.

Be Proactive: Register Your Appliances

Even if none of your current appliances are on recall, it’s a good idea to register them now. That way, if something does come up, you’ll be notified right away. Registering appliances takes just a few minutes but can save you a lot of time and stress in the long run.

Appliance recalls can feel overwhelming, but taking the right steps will ensure your home stays safe. While Appliance Rescue Service doesn’t handle recalls directly, we’re here to help keep your appliances running smoothly. Whether it’s routine maintenance or handling repairs after a recall, our technicians are just a call or click away. Visit our website to schedule an appointment or give us a call if you need assistance with your appliances.

Website
Call ((214) 599-0055) 

Examples of Appliance Recalls

• Maytag Dishwasher Recall (2010): Maytag recalled over 1.7 million dishwashers after discovering that the heating element could overheat and pose a fire risk.

• Frigidaire Stove Recall (2023): A recall was issued for certain Frigidaire stove models due to a malfunction that caused ovens to overheat, creating a potential fire hazard.

• Whirlpool Wall Ovens Recall (2016): Whirlpool recalled certain models of its wall ovens due to the potential for the oven racks to fall when they were in use. While this didn’t pose a fire hazard, it could cause burns or injuries from hot dishes falling. The recall was minor, involving a fix to adjust the placement of the racks.

Additional Reading
Navigating the Frigidaire Refrigerator Recall

Kitchen Safety 101: Protecting Your Little Ones at Home
Kitchen Hazards Unveiled

Troubleshoot Your Home Bar Appliances and Keep the Drinks Flowing

Common issues with ice makers, wine coolers, and kegerators—and how to fix them.

Having a well-functioning home bar makes hosting gatherings a breeze. Whether you're chilling wine, trying out your newest cocktail idea, or pouring a pint for friends, everything runs smoothly—until it doesn't. Just like any appliance, things can go wrong. Luckily, most common issues aren't too difficult to troubleshoot. Whether your wine cooler isn't cooling, your kegerator is daring to serve foamy beer, or your ice maker isn’t making ice, we’re here to walk you through what might be the problem.

In this guide, we'll cover some of the most common issues and troubleshooting tips for three home bar favorites: wine coolers, ice makers, and kegerators. Remember, before diving into any major repairs, it’s always a good idea to check your appliance’s warranty. Let’s get started!

General Troubleshooting Tips for All Home Bar Appliances

Before we dive into specific fixes, here are some general troubleshooting steps that apply to all home bar appliances:

• Check Power Supply: Make sure your appliance is plugged in and the outlet is working. If you’re unsure, try plugging it into another outlet or resetting the circuit breaker.

• Inspect Electrical Cords: Look for frayed or damaged cords that could be causing intermittent power issues.

• Read the User Manual: Sometimes, the solution is hiding in plain sight! User manuals often have troubleshooting steps and maintenance tips.

• Keep It Clean: Dust, dirt, and debris can cause malfunctions. Regular cleaning can prevent a host of issues.

Wine Cooler Troubleshooting

Compressor Not Running
The compressor is the heart of your wine cooler—and if it’s not running, neither is your cooler. If the temperature is all over the place, it could mean the compressor isn’t doing its job. It’s responsible for circulating refrigerant and pulling heat out of the unit.

How to Fix: First, unplug the cooler and give it a few minutes to cool off (pun intended). After about 5 to 10 minutes, plug it back in and listen for any buzzing or humming—those are good signs that your compressor is working. If you don’t hear anything, or if your cooler’s suddenly louder than when it was new, you might have a compressor problem on your hands.

Overheating Compressor
If your compressor’s hotter than usual (we’re talking “ouch” levels), it might be on the verge of shutting down. Excessive heat can bring everything to a halt, so it’s worth checking on.

How to Fix: Carefully touch the compressor and see if it’s extremely hot. If it’s too hot to touch, clean the condenser coils with a coil brush or vacuum. Also, check the fan near the compressor. If it’s not running, the fan may need to be replaced. In rare cases, adding refrigerant oil might be necessary—but that’s definitely a job for a professional.

Courtesy of Newair

Dirty Evaporator Fan
Noticing warm spots in your wine cooler? That’s often a sign of a dirty evaporator fan. The fan keeps cool air flowing evenly, so if it’s clogged with dust or grime, things won’t chill the way they should. And nobody wants warm wine!

How to Fix: Unplug the fridge and clean the fan blades with a soft brush or cloth. If that doesn’t restore airflow, the fan might need to be replaced. At that point, check your warranty and consider reaching out to a professional.

Malfunctioning Thermostat
A faulty thermostat can cause your cooler to cool unevenly. This can happen due to wiring problems, sensor failures, or just plain old age.

How to Fix: Use a thermometer to compare the actual temperature inside the fridge to the setting on the thermostat. If there’s a difference, recalibrating or replacing the thermostat might be necessary. Since this can be tricky, it’s usually best to call a pro.

Ice Maker Troubleshooting

An ice maker is essential for most homes, and especially for home bars. But if it stops working, you’ll want to get it back in action fast.

Ice Maker Not Producing Ice
If your ice maker isn’t producing ice, it could be an electrical issue, a clogged water line, or even frozen components.

How to Fix: Start with the basics—make sure the ice maker is plugged in and the outlet works. Then, check the water line for blockages or kinks. If the line’s frozen, try defrosting it by turning off the machine or using a hair dryer on a low setting. If that doesn’t help, the water inlet valve might need replacing.

Clogged Condensers
Just like your fridge, your ice maker has condenser coils. If these are dirty, it can slow ice production or stop it altogether.

How to Fix: Locate the condenser coils (usually at the back or bottom of the machine) and clean them with a brush or vacuum. It’s a good idea to do this every six months to keep things running smoothly.

Courtesy of Kissair

Noisy Ice Maker
Is your ice maker getting a bit too loud? It could be vibrating or sitting on an uneven surface.

How to Fix: Grab a level and check if the machine is sitting evenly. Make sure all four corners are secure and resting on a flat surface. Then, give the drip cap and other parts a quick once-over to make sure everything’s tightened. A little noise is normal, just like with your fridge, but if it gets too loud, it’s worth checking the fan.

Ice Tastes Bad
No one wants ice that tastes off. If your ice has a strange flavor, it’s probably due to a dirty water filter or buildup inside the machine.

How to Fix: Replace the water filter if it hasn’t been changed in a while. Most filters need changing every six months or so. Also, clean the machine’s interior with a manufacturer-recommended solution to get rid of any buildup.

Kegerator Troubleshooting

A kegerator is a great way to serve beer on tap, but when it’s not working right, it can be a real headache—especially if you’re hosting guests. Thankfully, most issues are easy to fix.

Cloudy Beer
Cloudy beer usually means the temperature is too low or the beer lines are dirty.

How to Fix: Raise the kegerator’s temperature to at least 36°F and make sure the lines are clean. Regular cleaning after every keg change is key to a good pour.

Flat Beer
Flat beer is often caused by improper pouring, dirty glasses, or a lack of CO2.

How to Fix: Make sure you’re pouring with a quick, steady pull on the tap. Check your glassware—greasy or soapy residue can kill carbonation, so clean glasses thoroughly. Lastly, ensure the CO2 tank is full and set the pressure between 10-12 PSI for most beers.

Courtesy of EdgeStar

Foamy Beer
Nobody likes a glass full of foam. Over-carbonation and warm beer lines are usually the main culprits behind that frothy pour.

How to Fix: Try lowering the CO2 pressure a bit and make sure your beer lines are staying cold. If the lines leave the fridge section, you might need a tower cooler to keep them chilled. Also, check for any kinks or blockages in the lines—they can mess with the flow and leave you with a glass full of foam.

No Beer Flow
If your kegerator has stopped dispensing beer entirely, you could be dealing with a gas leak, a blockage, or an empty CO2 tank.

How to Fix: Check if the CO2 tank is empty or if the gas regulator is faulty. If everything seems fine, inspect the beer line for blockages, especially if you’ve dry-hopped the beer in the keg.

When to Call a Professional

While you can handle many home bar appliance issues on your own, sometimes it’s best to call in the pros. Appliance Rescue Service specializes in ice maker repairs, making sure your setup is always party-ready. From strange noises to no ice at all, we’ve seen it all—and we’re here to help. We don’t handle kegerators or wine coolers, but when it comes to ice makers, you can count on our technicians to get the job done. Give us a call, and we’ll keep your home running smoothly with plenty of ice to go around!

Website

Call ((214) 599-0055)

Additional Reading
Revolutionizing Home Cooking: The Hottest Kitchen Tech Trends from CES 2024

The Labyrinth of Limescale

7 Most Common Issues With Your Ice Maker & Their Causes

Laundry 101: Extend the Life of Your Washer with These Tips

Avoid wear and tear on your appliances with these laundry tips.

Laundry might seem routine, but small habits can have a big impact—not just on your clothes but on the longevity of your washer, too. Over time, forgotten pockets, detergent overload, and oversized loads can wear down your machine. With these simple laundry tips, you’ll not only keep your clothes in great shape but also help your washer run smoothly for years to come. Let’s go over some easy steps to make both your laundry and appliance maintenance a breeze.

Laundry Tips

While we always think we know exactly what to do when doing laundry, it helps to cover the basics. Sometimes, we forget or just don't think about one or two steps because there are so many other things we have to do. So, let's brush over these quickly just to cover our bases.

Empty Every Pocket

Courtesy of RDNE Stock project

Leaving different items in your pockets can damage your clothes and your washer. Papers with ink or paint on them can end up dyeing clothing, and metal items like keys and nuts can damage the interior of your washer. So, before running anything through, make sure to turn pockets inside out. A fun tip if you have children is to put a change jar in the laundry room, and any change left in the pockets can then be used toward something fun for the family. This is especially useful if you have someone who always leaves loose change in their pockets before laundry day.

Limit the Detergent

No matter how many times we do it, there's always some part of our brain that thinks "more detergent equals more clean!" Sadly, that's not really the case. In reality, it just means you're creating more suds in the washer, which can cause a second rinse to be needed or make the washer work harder.

Limit the Load Size—Not Too Big or Too Small

This one is tricky. On the one hand, you don't want your load to be too small because then the sensors don't work quite right, and the computer brain of the washer essentially gets confused. So, throw in an extra towel or two if all you're trying to wash is one or two things.

Courtesy of Anna Shvets

On the other hand, you don't want the load to be too large. As we've covered in a different post, making continually oversized loads will cause your washer to run down its motor much faster than normal.

Wash Bras Carefully

Just like leaving keys or other metal parts in your pockets can be dangerous to the washer, bras can be too. If the bra gives out and the underwire starts poking out during the wash, it can damage the inside of your washer. To avoid this, always wash your bras on delicate and inside a lingerie bag.

Maintenance Tips

Make Sure It’s Level

Whether you’ve just purchased your first washer or you’re doing a checkup, start by making sure that it's level. Not only does this keep your laundry from destabilizing the washer during a cycle, but it also ensures that the water level inside the washer is accurate.

Check the Water-Fill Hoses

Courtesy of Ketut Subiyanto

Take a minute or two once a month to go over your water-fill hoses. Make sure they're connected properly and that they are not becoming brittle or cracked. When these start showing damage, it's time to replace them ASAP before you end up with a leak.

Descale Regularly

Just like the hoses, check once a month. All it takes is one load of vinegar to descale your washer. Not only will this prevent buildup in spots like your hoses or other nooks and crannies, but it also keeps the washer fresh and prevents any gross smells.

Think Ahead

Courtesy of Bia Sousa

If you're looking to move at some point, either find or get hold of the moving bolts for your washer. Having those keeps your washer from being damaged in transit, and once you get to your new house, you can have them removed and save them for the next time. If you've recently purchased a new washer, you can do that when it's delivered. Put them all in a labeled bag together and toss them in the junk drawer. Eventually, you'll use them.

Remove Any Lint

This one always comes up, and it should because of the dangers it poses to both your washer and dryer. Remove lint buildup. We talk about it more often with the dryer because it can catch fire, but lint buildup in your washer can just as easily cause damage—in this case, flooding. It's not common because it takes a lot of lint buildup, and normally your washer will have issues before that point with standing water. But it can happen. To that end, just as you would with your dryer, regularly take a washcloth, sweep through everything, check the seals and other nooks, and get rid of the lint. Three minutes and you're done.

With just a few small adjustments to your laundry routine, you can extend the life of both your clothes and your washer. By paying attention to things like detergent amounts, load sizes, and regular maintenance, you’ll save yourself from costly repairs down the road. But if your washer ever does need a little extra care, our team at Appliance Rescue Service is here to help. Whether it’s a quick fix or a full repair, we’ll keep your appliances running smoothly so you can focus on everything else. Don’t hesitate to reach out to us via our website or give us a call, and we’ll work with you to find a date and time that fits your needs. At Appliance Rescue Service, our number one priority is making sure your home is running smoothly again.

Website
Call: (214) 599-0055

Additional Reading
How to Keep Your Washing Machine Running Smoothly

Household Hauntings: The Frightening Reality of Appliance Neglect

The Labyrinth of Limescale

The Risks of DIY Appliance Repairs and How to Avoid Them

DIY repair might seem tempting, but knowing your limits can save you time, money, and headaches.

In today’s age of DIY everything, many homeowners take pride in at least trying to tackle their own household projects. Thanks to shows like This Old House and Fixer to Fabulous, we often think it’s possible to fix just about anything. And the sense of accomplishment is wonderful. But it’s crucial to recognize when a repair is beyond your skill level, especially when it comes to appliances. Understanding your limits can save you not only time and money but also prevent potential hazards to your health or home. In this post, we’ll walk through when it’s best to put down the toolbox and pick up the phone.

Assessing Your Skills

Before you dive into a repair, the most crucial step is to reflect on your current skills. Ask yourself the following questions:

• Have I successfully repaired an appliance before? Think about the different things you’ve fixed or replaced. Fixing a leaky faucet or replacing a light bulb are examples of minor repairs.

• Are you comfortable working with electrical components? If you have a solid understanding of how to read an electrical diagram and how wiring works, you might be able to tackle simpler electrical issues. However, if electricity is intimidating, it’s best to leave this to the pros.

• Do you understand the finer points of your appliance's inner workings? Many of today’s major appliances are complex. If you struggle to identify parts or keep track of how they fit together, professional help is likely necessary.

It isn’t a mark against you if you find yourself hesitating or feeling uncertain about any of these questions. It’s just a sign to reconsider your approach. Rather than causing yourself stress or potential harm, you can shift tactics now.

When to Call a Professional

Certain appliance repairs should always be left to the experts. Here are five scenarios where it is essential to get professional help:

1. Complex electrical issues
   If you’re fighting with the wiring in your oven, refrigerator, or washing machine, please call an expert. These appliances can pose significant risks. If you believe you’re dealing with a short circuit or damaged wires, that’s when you need a professional. Complex wiring issues can lead to electric shocks, fires, or even a total failure of the appliance.

2. Gas appliance repairs
   We all know that gas appliances can be dangerous if not treated with the proper respect. If you smell gas or hear a hissing sound, you need to evacuate immediately and call a professional. Gas leaks not only pose the risk of fires but can also lead to carbon monoxide poisoning. In the worst-case scenario, there could be an explosion. Gas appliance repairs are best left to those trained to handle such risks.

3. Refrigerant leaks
   Refrigerant leaks are just as dangerous. If you suspect your refrigerator is leaking coolant, do not attempt to fix it on your own. Handling refrigerants without proper training is hazardous, not only to your health but also to anyone else in your household. Professionals have the necessary training and equipment to safely manage refrigerant leaks.

4. Smart appliance troubleshooting
   Smart appliances often have complex software and connectivity features in addition to their hardware. If you’re encountering connectivity issues or software glitches, a professional can diagnose and repair the problem more effectively. Attempting to fix smart appliances on your own could void the warranty, making professional help a smart option.

5. Persistent problems after multiple DIY attempts
   If you’ve tried to fix an appliance several times without success, it’s time to step back. Continuing to attempt repairs can lead to lost parts or make the underlying problem worse. Both will result in a higher bill when you finally call a professional—compared to if you had done so from the start.

Risks of DIY Repairs

While we support doing basic maintenance tasks on your own, repairs come with risks. Here are a few:

• Safety hazards: As we’ve discussed in many of our articles, electrical shocks and gas leaks are serious dangers. If something isn’t repaired properly, it’s all too easy to get hurt. The risk simply isn’t worth it when compared to the safety of you and your family.

• Voiding warranties: As mentioned in last week’s article, appliances often come with warranties. Attempting repairs yourself can easily void these warranties. Always check the fine print to see if your appliance is still covered before diving into a project. It’s much cheaper to have it fixed under warranty than to attempt a DIY repair.

• Costly mistakes: An incorrect repair can lead to further damage and higher costs. It’s all too easy to try fixing one thing and end up damaging other parts, which will then also need repairs. This ends up being much more expensive than calling a professional in the first place.

Tips for DIY Success

If you’re determined to tackle appliance repairs on your own, here are some tips to increase your chances of success:

• Do your research: Make sure you’re thoroughly familiar with your appliance's manual and any online troubleshooting guides. Websites like RepairClinic or YouTube offer step-by-step instructions for many common repairs. The more expert knowledge you gather, the less likely you are to hit a wall.

• Start small: Don’t dive into the deep end. Begin with simple tasks, like replacing bulbs, clamps, or cleaning out the lint duct in your dryer. This will help you build your skills and confidence.

• Know when to stop: The most important skill in DIY repairs is knowing when to stop. If you start feeling overwhelmed or unsure if you’re doing the right thing, take a step back. It’s okay to consult a professional before creating a bigger problem. A good time to stop is if you’ve taken apart your appliance and can’t remember how to reassemble it.

Remember, your time is valuable. Weigh the potential costs of time and materials for a DIY repair against the time you could spend doing other things. There’s also peace of mind in hiring a professional. By understanding when to seek help, you can maintain your appliances efficiently, prolong their lifespan, and ensure a safe environment for you and your family.

Recognizing your limits is an essential part of being a responsible homeowner. While tackling DIY repairs can be fulfilling, there are times when it’s best to call in the experts. If you find yourself facing a challenging appliance issue, don’t hesitate to reach out to Appliance Rescue Service. Our team of skilled technicians is here to help ensure your home runs smoothly and safely.

Website

Call: ( (214) 599-0055)

Additional Reading
Minimize Waste, Maximize Sustainability: The Case for Appliance Repair

Test Your Refrigerator IQ

Unlocking Your Dishwasher: A Troubleshooting Guide

DIY Repairs vs. Your Appliance Warranty: What’s the Real Cost?

Discover why DIY repairs might end up costing you more than hiring a professional.

We’ve all been there—your dishwasher stops draining, or your washing machine begins to leak water just as you’re about to leave for work. Thanks to the rise of online tutorials, it's tempting to say I'll fix it! After all all you need is a few basic tools and a video right?  So why wait for a technician when you can DIY? Pause the moment though before you grab that wrench. It's important to ask: is it really worth the risk? While talking repair on your own seems like a great idea in the moment, One missed step or unaccounted for fact, can end up costing you much more than you think. And your appliance warranty is only the start.

The Safety Net of Appliance Warranties

Appliance warranties are a safety net many of us don't think about right until we need it. The standard warranty you will get, should cover the cost of repairs and replacements for major parts and labor. This gives you peace of mind if something happens within a specific time frame. If for instance your refrigerator is compressor gives out within the warranty period,  you can save hundreds of dollars. Without that warranty? It comes out of your pocket.

A warranty will typically extend from 1 to 5 years depending on the manufacturer. Whether something broke in transit, came off the manufacturing line with something wrong, or it just breaks, that warranty is your lifeline. However warranties also come with strict rules that you have to adhere to. This includes that all repairs are done by licensed professionals. So this means that any DIY attempts can immediately void your safety net.

The True Cost of DIY Repairs

It's so easy to fall into the trap of DIY appliance repairs. You don't want to wait for someone else to have to come, and having to take time off from work in order to be there, and then pay them on top of it. We get that. Especially with online repairs promising it's a quick 5 minute fix and you get the rush of satisfaction knowing you fixed it yourself. 

However, many warranties explicitly state that if you attempt to repair the appliance yourself, it voids the warranty. So, even if you do repair the faulty thermostat in your oven, if you break another sensor in the process of doing it? Your warranty is gone and all future repairs are paid for out of pocket, and that's even if you should have had another four years under the warranty.

You're smart though, you wouldn't try replacing the thermostat in your oven. What about a hose on your washer though? Imagine that you're washing machine starts leaking. After all, in several of our articles we tell you to pay attention to the hoses on your washing machine and to replace as needed,  so you're just trusting us. But in this case, the issue isn't on the outside. It's not easily visible by eye, and all you know is that the washer is leaking. So you find an instructional video online, and you open up the machine. That's where you find a cracked hose. At this point the video has been great so you replace the hose, but you accidentally damaged a small sensor that's needed for telling if the drum is full or not. Well since you opened up your washer, you voided your warranty. This means that you're stuck with the repair bill for the sensor as well as the hose.

This isn't just about your warranties though. Homeowner insurance policies don't always cover DIY repairs either. So this means that Financial risk can go beyond just the appliance. If our washing machine from our last example, continues to leak and damages your floor, you could be on the hook for that. Which then doubles your costs.

Safety and Hidden Risks

We've talked about your warranty and about your homeowners insurance, but doing DIY repairs can also put you at risk. Appliances like an electric dryer or a gas oven serious personal risks. If improperly handled, you can easily be shocked, start a gas leak, or a fire. There is a reason that we always say that if you don't have the proper training or if you're even a little uncertain, to call in a professional. 

A professional will have the proper training, to handle high voltage appliances. Professionals also have to know how to properly disengage gas appliances to safely fix them, without leading to gas or fire hazards.

What's more, many DIY attempts are due to misdiagnosed problems. It's easy to mistake one issue for another without professional training. This leads to improper repairs that not only can worsen the initial problem but they end up costing you time and money. And because it's difficult to get hold of the actual parts you need most fixes end up being temporary at best.

Why Professional Repairs Are Worth It

While DIY repairs may seem like a cost-effective solution at first, the risks involved usually make professional repairs the smarter choice. Licensed technicians are trained to diagnose and fix problems without causing additional damage. More importantly, hiring a professional ensures that your warranty remains intact, allowing you to take full advantage of any future coverage if needed.

Professional repair services also save you time and frustration. They also keep you from the potential of medical bills if something goes wrong. What would take one of us several hours to disassemble research and troubleshoot, is fixed by a technician in a fraction of that time. Certified professionals also have access to trademarked tools and original parts to ensure that the repair is done correctly the first time.

Conclusion: Protect Your Warranty, Protect Your Home

In the end, your appliance warranty is a valuable asset that you shouldn’t risk on a DIY gamble. While there’s nothing wrong with wanting to fix things yourself, the potential costs of voiding your warranty and causing further damage simply aren’t worth it. By trusting professional repair services like Appliance Rescue Service, you can rest assured that your appliances will be fixed correctly, keeping your warranty intact and your home running smoothly.

If you do have something that has gone wrong around your home, we hope you'll give us a call. You can reach us through our website or our offices where we will work with you to set up a time and date that fits your schedule. 

Website

Call ((214) 599-0055)

Additional Reading
Prepare Your Home for Fall: Essential Maintenance Tips

Household Hauntings: The Frightening Reality of Appliance Neglect

37 Reasons To Have Your Appliances Maintained Regularly