Dallas Microwave Repair: Signs it’s Time to Call the Professionals

Many of us take for granted what a workhorse the microwave is until it’s out of commission. When microwaves came on the scene in the 1980s, Americans rejoiced at a faster, easier way to get dinner on the table. And when your microwave isn’t working right…it’s a huge pain. Here are several signs that it might be time to call Appliance Rescue Service for Dallas microwave repair before it’s too late: 

Door Won’t Seal Shut

This is a problem. Without a proper seal, the food in your microwave will not cook evenly or completely. Be wary of running the microwave if the door doesn’t shut or seal properly.

Sparks are Flying

Occasionally, you might get a touch of something metallic in the microwave and it will spark for just a sec, but this should not be the norm. If there are sparks flying in your microwave, immediately open the door to stop the appliance, then unplug the device or cut power at the breaker. Do not turn the appliance back on until it has undergone professional microwave repair to avoid a fire hazard. 

Loud Noises

When the microwave is running, do you hear clanging, humming, or other loud noises coming from your microwave? If so, this can often be a sign of a turntable issue. If you do not immediately see an issue with the turntable after inspection, it’s time to call an expert Dallas appliance repairman to remedy the issue.

Food is Cold

If the food didn’t cook all the way and you know it should have in the time allocated, then something is off. Call the experts in microwave repair to fix the issue.

Contact us at Appliance Rescue Service in Dallas, Texas if you experience any of these issues and need professional microwave repair in Dallas. Our expertly trained technicians will fix the problem quickly, so you’re back up and running in no time. We proudly serve Dallas, Fort Worth, Carrollton, Irving, Las Colinas, Flower Mound, Coppell. Grapevine, and more. 

Gas Cooktop Repair: Why Won’t My Gas Burner Light?

Gas cooktops and ranges are a chef’s dream, often touted as the best for their ability to distribute heat evenly and then maintain that constant heat temperature over time. 

But here’s a common gas cooktop repair question we get at Appliance Rescue Service in Dallas, Texas: Why won’t my gas burner light?

It’s a great question and one of the most common frustrations from homeowners. Here are a few simple reasons your gas burner isn’t lighting:

1.    Burner Cap isn’t Aligned Properly.

Once your cooktop has cooled, remove the grate and burner cap. Reinstall the burner cap, paying careful attention to the alignment, and then see if that resolves the issue.

2.    Food Debris is in the Way.

Again, allow the burner to cool, and then inspect the igniter, burner, and control knobs. Is there any food debris that has been burned onto these areas? If so, wipe away with a soft sponge and cleaner. For any small crevices, use a paperclip to scrape the debris out, then try to ignite the burner again.

3.    Burner is Too Wet.

If you recently cleaned the cooktop or had a spill of some sort, then your issue might be that there is moisture in the burner that is preventing it to light. Simply remove the burner cap and allow at least 30 minutes for the burner to dry out, then try again.  

If none of these troubleshooting tips remedy your question as to why your gas burner won’t light, then the issue might be your igniter, spark ignition switch, or spark module. Call the best appliance repair company – Appliance Rescue Service in Dallas, Texas – today and we can diagnose your issue quickly and efficiently. We proudly serve the entire North Texas community, including Addison, Plano, McKinney, Frisco, Prosper, Little Elm, Lewisville, Flower Mound, Keller, and more.

How to Level a Shaking Washing Machine

Ever been in the other room while a load of laundry is washing, only to be startled by a sudden, large rumbling. The culprit: an uneven washing machine.

Washing machines that aren’t sitting level – or where the weight inside isn’t evenly distributed – can not only be a noise violation, but they can damage the internal mechanisms of the washing machine or even the floor beneath the washing machine. 

If you suspect the shaking washing machine is not sitting level, then here’s an easy fix from Appliance Rescue Service in Dallas, Texas:

Step 1: Check if its Level

The obvious first step is to grab a carpenter’s bubble level and set it on top of your shaking washing machine to determine if it’s level. If not, keep reading to learn how to adjust the legs of your machine. 

Step 2: Adjust the Front Legs of the Washer

Start by adjusting the front legs of your washing machine. The goal is to have the machine sit as low to the ground as possible to prevent vibrations, so loosen the lug nut on one of the front legs, shorten the leg, and then use your level to adjust the other leg accordingly. 

Step 3: Adjust the Back Legs of the Washer

Normally the back legs of your washing machine are built to self adjust, so once the adjustments are made on the front legs and everything is level, gently lift the back of the machine and set it back down. Take your level to verify that all is properly leveled. 

Step 4: Tighten Everything Down

One you’re satisfied with your adjustments, tighten all lug nuts back into place.

Step 5: Test the Machine

Now for the true test! Run the wash cycle and see if the shaking washing machine issue still exists. If the problem is not remedied, it may be time to call in the professional appliance repairmen in Dallas at Appliance Rescue Service in Dallas, Texas!

Dishwasher Not Draining? Try these Simple Tips from the Experts at Appliance Rescue Service!

Dishwashers are a workhorse in the kitchen – daily scrubbing away stuck on food particles – that it’s no surprise they can sometimes become backed up. If you notice that your dishwasher is not draining properly, don’t panic. Try these simple tips before calling the best appliance repairmen at Appliance Rescue Service in Dallas, Texas:

1.    Run the Disposal

Water that drains from the dishwasher often drains up through the disposal, so if the disposal is full – you guessed it – the water may get backed up! So first up, run your disposal for a minute or so to loosen any harden food that is stuck in the disposal that could be contributing to the issue.

2.    Clean the Air Gap

Many homes have an air gap which prevents water from the sink from backing up into your dishwasher. Sometimes that air gap can gets clogged, which leads to water backing up in the dishwasher. If you have an air gap, it’s likely a dome shaped object sticking up by your sink somewhere. Simply remove the cover and clear any debris, then try the dishwasher again. 

3.    Check for a Clog in the Drain Hose

This one is no fun, but if the first two tips don’t help your dishwasher start draining, then you’ll need to check your drain hose to see if there is a clog in the line. First, disconnect all power from your dishwasher. Next, remove the toe kick panel and locate the drain hose. Disconnect the line and then attempt to blow air through it to loosen any clogs in the line. 

If you find that your dishwasher still won’t drain and you need help finding the issue, call Appliance Rescue Service for Dallas dishwasher repair today! Our team will fix the issue quickly, with prompt, courteous service every time. 

Call us for Luxury Appliance Repair in Dallas, Texas!

Luxury appliances are known to be as long lasting as they are beautiful, and it can be frustrated when one of them is in need of repair. 

Unfortunately, even the highest quality, luxury appliances sometimes need repairs too. Many people worry this will cost an arm and a leg or take forever to fix, and sometimes it does. But it doesn’t have to when you call us at Appliance Rescue Service in Dallas, Texas!

How Does the Pricing Work for Luxury Appliance Repair in Dallas?

It’s simple. When you call for an appointment, an expertly trained technician will come, diagnose the issue, and then provide you with a full estimate before any work is done. Our diagnostic fee is the same whether it’s a luxury appliance or not. We do not upcharge for luxury appliances or parts; however, sometimes certain parts from various manufacturers do cost more than others. All of this is outlined and explained to you in advance, and we will proceed with the luxury appliance repair when you’re ready! 

Can Your Technicians Fix All Brands of Luxury Appliances?

In short, yes! Many luxury appliance manufacturers require their own specialty training on their appliances, and our technicians are expertly trained to get the job done. You can trust us to fix your Sub-Zero, Wolf, Viking, Miele, Dacor, Gaggenau, Thermador, Bosch, Fisher-Paykel, and Asko.

Do Your Repairs Come with a Warranty?

Yes again! Our 90-day warranty on parts (30 days on service) applies to all manufacturers – even luxury appliance brands! Simply call us back, and we can come remedy the issue at no cost to you. 

So before you reach to dial the manufacturer’s appliance repair hotline, remember to call Appliance Rescue Service in Dallas, Texas for all your luxury appliance repair needs. You will not be disappointed with our level of service that gets the job done quickly and effectively, so you can get back to enjoying your appliances.