Ever been in the other room while a load of laundry is washing, only to be startled by a sudden, large rumbling. The culprit: an uneven washing machine.

Washing machines that aren’t sitting level – or where the weight inside isn’t evenly distributed – can not only be a noise violation, but they can damage the internal mechanisms of the washing machine or even the floor beneath the washing machine.

If you suspect the shaking washing machine is not sitting level, then here’s an easy fix from Appliance Rescue Service in Dallas, Texas:

Step 1: Check if its Level

The obvious first step is to grab a carpenter’s bubble level and set it on top of your shaking washing machine to determine if it’s level. If not, keep reading to learn how to adjust the legs of your machine.

Step 2: Adjust the Front Legs of the Washer

Start by adjusting the front legs of your washing machine. The goal is to have the machine sit as low to the ground as possible to prevent vibrations, so loosen the lug nut on one of the front legs, shorten the leg, and then use your level to adjust the other leg accordingly.

Step 3: Adjust the Back Legs of the Washer

Normally the back legs of your washing machine are built to self adjust, so once the adjustments are made on the front legs and everything is level, gently lift the back of the machine and set it back down. Take your level to verify that all is properly leveled.

Step 4: Tighten Everything Down

One you’re satisfied with your adjustments, tighten all lug nuts back into place.

Step 5: Test the Machine

Now for the true test! Run the wash cycle and see if the shaking washing machine issue still exists. If the problem is not remedied, it may be time to call in the professional appliance repairmen in Dallas at Appliance Rescue Service in Dallas, Texas!